Addonics RT93DAHXML Uživatelská příručka stáhnout pdf

T E C H N O L O G I E S

User Guide

RAID Tower IX

(RT93DAHX / RT93DAHXML)

Notes on Spare Drives using the Easy RAID Setting (EZ)

When EZ function is ENABLED, the auto-rebuilding to spare drive is automatic.

The degraded RAID group will start rebuilding automatically by using the existing

spare drive.

* Spare drive can be either plugged before RAID building or a new drive can be plug

as the spare drive when RAID rebuild is required.

A. Which port acts as a spare drive?

The last drive will automatically become the spare drive.

For a 3-drive RAID5 with spare:

Drives connected to SATA ports 1~3 belong to the active RAID5

array and drive connected to port 4 is the spare.

For a 4-drive RAID10 with spare:

Drives connected to SATA ports 1~4 belong to the active RAID10

array and drive connected to port 5 is the spare.

For a 2-drive RAID1 with spare:

Drives connected to SATA ports 1& 4 belong to the active RAID1

array and drive connected to port 5 is the spare.

B. When will rebuild action start?

• When the raid fails and EZ is enabled, the HPM-XA will

automatically rebuild the RAID group using the spare.

• When the raid fails and EZ is disabled, the HPM-XA will NOT

rebuild the raid group unless you install a good drive to replace the

failed drive.

Connecting the Power Cable and RAID Tower to the

Computer

a. Connect the power cord provided from the wall

outlet to the back of the tower.

b. Make sure the power is off (power LED light

should be off).

c. Connect the infiniband cable from the back of

the tower to the multilane connector on the

computer.

Power on/off control

a. A main power switch is located at the back of

the tower. Turn the switch on. Another auxiliary

switch is located on the front of the tower.

b. Make sure the power is off on the auxiliary

switch (power LED light should be off).

c. Power on the tower.

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

v5.1.11

www.addonics.com

Power

Connector

Power

Switch

Power

Switch

Back

Bottom Front

HDD LEDs

1 2 3 4

Shrnutí obsahu

Strany 1 - User Guide

T E C H N O L O G I E SUser GuideRAID Tower IX(RT93DAHX / RT93DAHXML)Notes on Spare Drives using the Easy RAID Setting (EZ)When EZ function is ENABLE

Strany 2 - RAID Tower IX

1 6www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ f. Press the RAID set

Strany 3 - Error LED Activity LED

3 4www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/Default factory DIP Swit

Strany 4

5 2www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/Dip Switch SettingsEnabl

Komentáře k této Příručce

Žádné komentáře

Addonics RT93DAHXML Uživatelská příručka

Procházejte online nebo si stáhněte Uživatelská příručka pro Dokovací stanice HDD / SSD Addonics RT93DAHXML. Addonics RT93DAHXML Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Dokovací stanice HDD / SSD Addonics RT93DAHXML